harvest right Canada Opções
harvest right Canada Opções
Blog Article
I would prefer those fittings to have internal O rings and knurled thread on ports (similar to R134a vacuum gauge sets) that do not require high torque compression fittings. Finger tight and you are good to go. You spot a leak, change the Este ring and you're back in business.
5 Posted September 16, 2015 (edited) Gypsyman: Proof again that "great minds think alike". In my initial pondering, I thought using an oil filter base would be a logical approach -- but I didn't have one handy and figured my car might miss it. Besides, one of my goals was to keep this affordable, and they tend to be a little pricey.
We have to face one hard fact when shopping for home freeze dryers. That fact is, unlike many other purchases, freeze dryers aren't cheap. However, unlike many other purchases, a freeze dryer can provide a lifetime of cost savings that ultimately pay for itself.
Tony, if you see this, I went ahead and purchased the catch can. Do you think it's okay to just purchase a reducer to go from the size of the exhaust to the size of the hose that came with the can?
The good news is, their collection of home freeze dryers for sale are high-quality and possess so far delivered great results across a wide spectrum of buyers.
I did a couple of batches (peas and carrots, and another load of precooked chicken meatballs cut in half) and it all worked perfectly. Looking forward to trying out some new things and sharing the results.
Vic says: 2 years ago Going on a second year with the freeze dryer. Considering getting another one. It really takes commitment, but it is very rewarding. The freezer is good also, but it needs constant source of electricity, and the storage is limited to the size of the freezer.
The easiest way to reconstitute food is with water or broth. I like to weigh my trays before processing them. Then I write the weight and the name of the food on a piece of masking tape and put it on the front of the tray.
A couple of other points: There are obvious and easy improvements that could be made, such as using a container with a dispensing faucet (think of a lemonade jar, for example). Also, for the technically savvy, auto-mechanic-type person who may be wondering about it, there is an anti-backflow seal that has to be removed from the oil filter, but that can be removed by cutting through it and pulling it out with needle nose pliers, which is easily done.
I personally have a medium Harvest Right Freeze Dryer and love it. I actually wish I had gotten the large! But for our family of 4 (almost 5), it’s a perfect fit, we have it running constantly and fill bins full of homemade freeze dried food.
The only downside is that the interior is now so cold that defrost time has doubled! I use a large high volume fan to defrost the unit, not the heat trays. It used to be a 15 Shop Now minute job, now it is closer to 30 minutes.
Another best practice is to set up a station. This will take space. Having a freeze dryer, freezer, prep table, and processing area all together has been Know More a good decision. It can all be done in a large kitchen, but the machines are noisy and a freeze-drying project can take up a lot of space.
Purchasing a freeze dryer can be an excellent investment for those interested in food preservation, emergency preparedness, or simply enjoying homemade snacks that last longer without losing their quality.
And therein lies the best piece of advice I can offer on this topic: Keep your freeze dryer running. Downtime is wasted time. Some items take a while. Others are quick. But keeping the freeze dryer going almost non-stop is the key to getting the bang for the buck.